Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 36
Adjust the Side-Trim Offset, Introduction, Select a non-standard side-trim offset
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4 - Standard Tasks - Adjust the Side-Trim Offset Adjust the Side-Trim Offset Introduction By default, the book is side-trimmed by an equal amount on each side. The side-trim dimension is automatically calculated to trim 2.5mm from each side. For example, if the book is 210mm wide, the default trim is 205mm. This sidetrim dimension can be changed. Touch BASIC > SIDE TRIM and then touch '+' or ' - ' to adjust the TRIM SIZE. The side-trim can be offset from the centre line by a maximum of 40mm, dependent on how much is to be trimmed. The machine will not permit a setting that conflicts with the stitch position. Change the stitch pitch if necessary (see "Adjust the Stitch Pitch" on page 31). Maximum side-trim offset Trim 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 (x2) Max 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 offset If the TRIM OFFSET is changed, the icon changes to show the setting. The icon is the same orientation as the book delivery out of the Side-Trimmer. Offset = -5.0 Offset = 0.0 Offset = +5.0 Negative setting More is trimmed from the left side of the book. Zero setting The same amount is trimmed from each side of the book. Positive setting More is trimmed from the right side of the book. Select a non-standard side-trim offset 1. Touch BASIC > SIDE TRIM and then touch '+' or ' - ' to adjust the TRIM OFFSET. 2. Touch CLOSE to close the window. Select the default side-trim offset 1. Touch BASIC > SIDE TRIM and then touch AUTO. 2. Touch CLOSE to close the window. 32 Watkiss PowerSquare™224 User Manual