Konica Minolta bizhub PRESS 1250 Watkiss PowerSquare 224 User Manual with side - Page 82
See Clear a Stitch, JAM IN STITCH HEAD
View all Konica Minolta bizhub PRESS 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
5 - Error Conditions, Problems and Solutions - Message List Message Information Reference JAM IN SIDE TRIM JAM IN STACKER AREA JAM IN STITCHER AREA JAM IN STITCH HEAD JAM IN TRIMMER MAIN CONTROL - No comms MANUALLY PARK SHUTTLE MISSING STITCHES Open and then close the top cover of the side-trimmer. Then, if necessary, open the top cover of the side-trimmer and check for paper trimmings or obstructions. Close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. There is a paper jam at the outfeed of the machine. Remove the jammed books and continue. There is a paper jam in the stitch area. Open the folder cover, remove the paper jam and continue. See "Jam in the Stitch Area" on page 86. There is a jam in the stitch head. See "Clear a Stitch Head Jam" on page 94. There is a book jammed in the trimmer. Clear the jam and continue. See "Jam in the Trim Area" on page 89. Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. The shuttle is not parked correctly. Open the folder cover and move the shuttle to the park position. Close the folder cover. The shuttle will reset. When the message list is clear, continue operation. See "Manually park the Shuttle" on page 100. The machine has detected missed stitches. Check if the stitch-wire is jammed or if the stitch-wire spool is empty. See "Clear a Stitch-wire Jam" on page 92 or see "Install New Stitchwire" on page 116. 78 Watkiss PowerSquare™224 User Manual