Kyocera ECOSYS FS-3640MFP FS-C2626MFP/C3640MFP Fax Operation Guide - Page 58

Sending Faxes > Basic transmission procedure 4 Select the transmission method Ready to send. FAX On Hook Chain Direct Recall 10:10 Dest. : Check Add Dest. Address Book Functions Ext Address Book One Touch Key Favorites GB0669_00 There are two transmission methods: memory transmission and direct transmission. Memory transmission: The original is scanned into memory before communication starts. Memory transmission is selected by default. Direct transmission: The destination is dialed and communication starts before the original is scanned. Press [Direct] to change the transmission method to direct transmission. The key will be highlighted on the touch panel. If the [Direct] is pressed in the highlighted state, the transmission method will change to memory transmission. For details, refer to Direct Transmission on page 4-14. 5 Selecting the functions Ready to send. FAX On Hook Chain Direct Recall 10:10 Dest. : Check Add Dest. Set functions such as the scanning density and fax resolution. Press [Function Menu] to display all the functions. Address Book Functions Ext Address Book One Touch Key Favorites 6 Send Start GB0669_00 For details, refer to Fax transmission functions on page 4-8. When scanning finishes, transmission starts. When originals are placed in the document processor After originals placed in the document processor are scanned and stored in the memory, the receiving system is dialed. When originals are placed on the glass surface After originals placed on the glass surface are scanned and stored in the memory, the receiving system is dialed. NOTE When continuous scan is set, you can continue with scanning of a next original after an original on the glass surface has been stored in memory. Every time one page is scanned, you perform an operation to allow continued scanning, and after all the originals have been stored in memory, the receiving system is dialed. For details, refer to Continuous Scan on page 4-13. 4-3