Kyocera FS-C2126MFP FS-C2026MFPplus/C2126MFPplus/C2526MFP/C2626MFP Driver Guid - Page 13
Installing in Custom Mode with a Network Connection using Custom Select, Enable Status Monitor
View all Kyocera FS-C2126MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Printer Driver Installation Click Finish, and retry the installation. If the same message appears again, contact your system administrator. The installation of the printer is now complete. If prompted, restart your computer. Installing in Custom Mode with a Network Connection using Custom Select This section describes the custom installation procedure of the driver software in Windows operating systems using a network connection. 1 Ensure that your printer and computer are connected to a network. 2 On the Installation Method page, select Custom Mode. 3 The Discover Printing System page opens, searching for your printing system. The Discover button is automatically selected. Choose Custom select and click Next. 4 The Printing System page appears. Select your printing system model from the list and click Next. If there is only one driver model, this page does not appear. Proceed to the next step. 5 On the Printer Port page, select the port connected to your printing system, or add a port connected to your system by clicking Add Port. Click Next. 6 On the Custom Installation page, select the driver and software packages you want to install from the Driver and Utility tabs, and clear those not intended for installation. Click Next. If you only select software packages from the Utility tab, you will skip to the Confirm Settings page. 7 On the Printer Settings page, you can assign a name for your printing system. You can also choose to share this printer with others or set this printer as the default printer. Make your selections, and then click Next. 8 On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings. Note: In Windows XP, or Windows Server 2003, if the Hardware Installation warning dialog box appears, click Continue Anyway. In Windows 7, Windows Vista, or Windows Server 2008, if a warning dialog box appears stating Windows can't verify the publisher of this driver software, click Install this driver software anyway. 9 The Installation Completed page appears displaying the following driver options. Print a test page This selection verifies a connection with the printer and creates a print out of the installed driver components. Enable Status Monitor 1-7