LG BD390 Owner's Manual (English) - Page 21

BD390V-N_BUSALLV_MFL62344757 9/30/09 9:52 AM Page 21 3. Use v V b B to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. Note: If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set the [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using v V b B and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. 4. Select [OK] and press ENTER to apply network settings. 5. The player will ask you to test the network connection.Select [OK] and press ENTER to complete the network connection. Wireless network Another connection option is to use an Access Point or an wireless router. In the example configuration for wireless connection below, this player would be able to access content from either of the PCs. BBDD PPllaayyeerr Brrooaaddbbaanndd Serrvviiccee Wireless Communication Access PPooiinntt// Wireelleessss rroouutteerr 6. If you select [Test] and press ENTER at step 5 above, the network connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu. Internet connection status Local Area Network status PC The network configuration and connection method may vary depending on the equipment in use and the network environment. This player is equipped with an IEEE 802.11n wireless module, which also supports the 802.11b/g standards. For the best wireless performance, we recommend using a IEEE 802.11n certified Wi-Fi network (access point or wireless router). Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings. 21