LG N1910LZ-BF User Manual - Page 31
Label Tab, Gateway, Primary DNS Server, Domain Name, PCoIP Device Name, PCoIP Device Description - firmware
View all LG N1910LZ-BF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Using PCoIP Solution 31 EEngNliGsh yy Gateway The Gateway field contains the gateway IP address of the device. If DHCP is disabled, this field is required. If DHCP is enabled, this field cannot be edited. yy Primary DNS Server The Primary DNS Server field contains the primary DNS IP address of the device. This field is optional. If DHCP is enabled, this field cannot be edited. yy Secondary DNS Server The Secondary DNS Server field contains the secondary DNS IP address of the device. This field is optional. If the DHCP is enabled, this field cannot be edited. yy Domain Name The Domain Name field contains the domain name used, e.g. "domain local". This field is optional. It specifies on which domain the host or portal operates. yy FQDN The FQDN field represents the Fully Qualified Domain Name of the host or portal. The default value is PCoIP-host-MAC or PCoIP-portal-MAC, where MAC is the MAC address of the host or portal. If there is a domain name, it will be added to the FQDN in the format of PCoIP-host-MAC.domain.local NOTE yyIn order to utilize the FQDN feature, a DNS server, configured properly with DHCP option 81, must be used. yy Ethernet Mode The Ethernet Mode field specifies the portal's Ethernet mode. The available options are as follows. yy Auto yy 100 Mbps Full-Duplex yy 10 Mbps Full-Duplex If another network device is configured to operate under 10 Mbps Full-Duplex or 100Mbps FullDuplex, the administrator should always set the Ethernet Mode field to Auto and only use 10 Mbps Full-Duplex or 100 Mbps Full-Duplex. Label Tab The Label tab allows the administrator or host to add customized information to the portal. NOTE yyThe portal label parameters can also be con- figured using the Webpage Administration Interface. Figure 2-7. Label Configuration yy PCoIP Device Name In the PCoIP Device Name field, the administrator can specify a logical name to the host or portal. The default value is PCoIP-host-MAC or PCoIPportal-MAC, where MAC is the MAC address of the host or portal. yy PCoIP Device Description In the PCoIP Device Description field, the administrator can add specific information, such as the endpoint location, or add a description to the host or portal. This field cannot be used in the PCoIP firmware and accessibility is strictly limited to the administrator. yy Generic Tag In the Generic Tag field, the administrator can add a generic tag to the host or portal. This field cannot be used in the PCoIP firmware and accessibility is strictly limited to the administrator.