LG N1910LZ-BF User Manual - Page 32

EEngNliGsh 32 Using PCoIP Solution Connection Management Tab The Connection Management tab allows the user to enable or disable the connection management and specify the connection manager's IP address. In a managed connection, an external Connection Management Server can communicate with a device to remotely control and configure the device. The connection manager can also search for an appropriate peer to connect to the device. Connection Management significantly reduces the tasks of the administrator in a large and complicated system. NOTE yyThe Connection Management parameters can also be configured using the Webpage Administration Interface. Table 2-1 shows the configuration parameters that can be used with one of the two methods. If an incorrect IP address or DNS name is provided, an OSD message is displayed prompting the administrator to correct the error. Table 2-1 Connection Manager Method yy Enable Event Log Notification The Enable Event Log Notification field controls whether the PCoIP host and the portal devices will send their event log to the connection management server. yy Enable Diagnostic Log The Enable Diagnostic Log field specifies whether to log the connection management specific debug message to the PCoIP host and to the portal devices' event logs. Figure 2-8. Connection Management Configuration yy Enable Connection Management If the Enable Connection Management option is enabled, the device can be controlled and configured from an external connection manager. yy Identify Connection Manager By The Identify Connection Manager By selector allows the administrator to decide whether to identify the connection manager by IP Address or by FQDN. If Connection Management is disabled, this field is not required and can therefore not be edited.