LG N1910LZ-BF User Manual - Page 7

EEngNliGsh ASSEMBLING AND PREPARING 7 Adjusting the stand height 1 Place the monitor mounted on the stand base in an upright position. 2 Remove the tape attached at the bottom rear of the stand body, then pull out the locking pin. Stand Body Tape Locking Pin Adjusting the angle 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 15° forwards and 5° backwards for a comfortable viewing experience. - 5 15 Front Side Rear Side 3 The height can be adjusted up to 110 mm. 110.0 mm WARNING yyTo avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor's frame as illustrated below. CAUTION yyOnce the pin is removed, it is not necessary to re-insert it to adjust the height. WARNING yyDo not put your finger between the screen and the base (chassis) when adjusting the screen's height. - 5 15 yyBe careful not to touch or press the screen area when adjusting the angle of the monitor.