Lexmark 7675 Fax Guide - Page 53

5 To change the length of time between redials: a Press the up or down arrow button until Redial Time is highlighted, and then press OK. b Press the up or down arrow button until the setting you want is highlighted, and then press OK. SCHEDULE TO RESEND FAX AT A LATER TIME See the instructions on sending a broadcast fax at a scheduled time. Phone Line Error These are possible causes and solutions. Try one or more of the following: REVIEW DIGITAL PHONE SERVICE CHECKLIST The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services can be used. • If you are using an ISDN telephone service, connect the printer to an analog telephone port (an R-interface port) on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN provider. • If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact your DSL provider. • If you are using a PBX telephone service, make sure you are connecting to an analog connection on the PBX. If none exists, consider installing an analog telephone line for the fax machine. For more information on faxing when using a PBX telephone service, see the instructions for setting up to fax while behind a PBX. CHECK PHONE LINE If the telephone line is being used by another device, wait until the other device is finished before sending the fax. CHECK CABLE CONNECTIONS Make sure cable connections for the following hardware are secure, if applicable: • Power supply • Telephone • Handset • Answering machine Troubleshooting 53