Lexmark C782 User's Guide - Page 29
Printing from a USB flash memory device, Ready, Printer Busy - paper jam
View all Lexmark C782 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Printing Printing from a USB flash memory device A USB Direct interface is located on the operator panel so you can insert a USB flash memory device and print PDF documents and supported graphic files. Printing a document from a USB flash memory device is similar to printing a held job. Note: Supported graphic types are .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, and .dcx. For information regarding tested and approved USB flash memory devices, see the Lexmark Web site at www.lexmark.com. Note the following when using a USB flash memory device with the printer USB Direct Interface: • USB devices must be compatible with the USB 2.0 standard. • Hi-Speed USB devices must support the Full-Speed standard as well. Devices only supporting USB low speed capabilities are not supported. • USB devices must support the FAT file system. Devices formatted with NTFS or any other file system are not supported. • You cannot print encrypted files or files without printing permissions. To print from a USB flash memory device: 1 Make sure the printer is on and Ready or Busy appears. 2 Insert a USB flash memory device into the USB Direct interface. Note: • If you insert the memory device when the printer requires attention such as when a paper jam has occurred, the printer ignores the memory device. • If you insert the memory device when the printer is busy printing other jobs, the message Printer Busy appears. Select Continue, and your job prints after the other jobs finish. Printing from a USB flash memory device 29