Lexmark E330 Service Manual - Page 110
Power-On operations
View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
4505 Accessing the configuration and diagnostic groups Power-On operations To access printer operations: 1. Turn off the printer. 2. Open the front cover. 3. Press and hold the buttons in the following table for the operation needed. Operation Enter configuration menu mode Enter diagnostics mode Reset NVRAM and enter normal mode Power-on action 1. Power on with cover open and pressed. 2. Close cover once the displayed. light is 1. Power on with top cover open and pressed. 2. Close cover once the displayed. light is 1. Power on with top cover open and both and buttons pressed. 2. Close cover once the displayed. light is 4. Turn on the printer. Hold the selected button until the lights cycle on the operator panel. 5. Close the cover and wait for the printer to activate the drive. 6. Print menus by pressing and holding until the lights flash (see menu samples on page 3-4 and page 3-5). 3-2 Service Manual