Lexmark E330 Service Manual - Page 98
Partial blank image/white spots no periodic pattern, Variation in image density horizontally across - drum
View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
4505 Partial blank image/white spots (no periodic pattern) FRU Toner cartridge (not a FRU) Paper (not a FRU) Action Remove the toner cartridge assembly and gently shake the assembly to evenly distribute the toner. If toner cartridge is low, try a new one. Make sure recommended paper is being used. Variation in image density horizontally across page FRU PC Kit (not a FRU) Transfer roll Action The charge roll may have an unbalanced pressure against the Photoconductor (PC) drum. Try a new PC Kit. Check the springs in the left and right transfer roll bearings. The bearing assemblies should support the transfer roll, applying even pressure to the PC drum. Replace the transfer roll assembly if the springs or bearing show signs of damage or fatigue. Inspect the transfer roll for signs of wear, damage or contamination. Replace as necessary. 2-70 Service Manual