Lexmark E330 Service Manual - Page 90
Paper picks during POST and/or continuously, Paper picks but stops half way through the printer - printer feeds paper then stops
View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
4505 Paper picks during POST and/or continuously FRU ACM (auto comp mechanism or paper feed) clutch Manual feed clutch Action Check the ACM clutch for wear. The solenoid interacts with the clutch to control the motion of the pick tires. If the ratchet teeth of the ACM clutch assembly are worn or broken, the solenoid may not stop the ACM from rotating. Replace the ACM clutch assembly if necessary. Check the manual feed clutch for the same damage. Paper picks but stops half way through the printer FRU Input sensor #1 (under print cartridge assembly) and Input sensor #2 (manual) Action Make sure the input sensors are working properly. Check for a broken or stuck flag on the input sensors. Make sure the cables are seated on the controller card at J20 (Tray 1 input) and J18 (manual input). Check for less than +5 V dc on pin 3 at J20 (Tray 1 input) and pin 1 at J18 (manual input sensor). • If correct, replace the input paper feed sensor. • If these voltages are not correct, replace the controller card. 2-62 Service Manual