Lexmark E330 Service Manual - Page 99
Poor fusing of image, Light print
View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Poor fusing of image FRU Fuser Paper (not a FRU) Light print FRU Toner cartridge (not a FRU) Transfer roll LVPS/HVPS board 4505 Action The fuser may not be operating at the proper temperature to fuse the toner to the paper. See"Hot fuser service check" on page 2-56 for more information. Make sure recommended paper is being used. Action Make sure the toner cartridge and PC Kit are installed correctly and that the toner cartridge is not low on toner. If the problem continues, install a new toner cartridge. Recheck condition before replacing PC Kit, if necessary. Check the transfer roll for signs of toner buildup and contamination. Inspect the HVPS contact (transfer roll) for contamination. Verify the high voltage cable is plugged into the LVPS/HVPS. If all components appear free of contamination, replace the following FRUs one at a time in the order shown: • Transfer roll • LVPS/HVPS board Diagnostic information 2-71