Lexmark E330 Service Manual - Page 94
Print quality service checks, Using print quality test s
View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
4505 Print quality service checks Note: Ensure cover is closed tightly. A gap in the opening may allow light to expose the photoconductor resulting in a 'dirty' print. Using print quality test pages To help isolate print quality problems, like streaking, print test pages using the print quality test pages setting: 1. Turn the printer on with pressed and the front door open. 2. When light stays on, close cover. 3. Wait (approximately 7 seconds) until the printer drive activates. 4. Enter the configuration menu. See "Configuration and diagnostic groups" on page 3-1 for more information. 5. Slowly press and release lights come on. three times until the and 6. Press and hold test pages. until all the lights flash to initiate print quality Three pages print to help you evaluate print quality. The first page has various fonts, the second page is gray, and the third page is black. Once the paper exits into the output bin, the printer returns to the home state (four top lights on). 7. Use the test pages to isolate problems such as light or toner streaks. See "Symptom tables" on page 2-44 for solutions to these problems. 8. To exit print quality test pages, turn the printer off. 2-66 Service Manual