Lexmark E330 Service Manual - Page 124

Covers

Get Lexmark E330 PDF manuals and user guides View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 124 highlights

4505 Covers Access cover removal (See "Covers" on page 7-2.) 1. Open the front access cover. 2. Place thumbs on the inside of the respective hinge. 3. Force the left hinge out of its socket and relax it above the socket. 4. Force the right hinge out of its socket and lift it above the socket. CAUTION: Do not pull the fuser link out of the printer any farther than when the door is fully open. Otherwise, the link extension may cause the cartridge coupler to become dislodged. 5. Carefully lift the cover free from the printer frame. 6. Use your left hand to hold the fuser link at the cover joint while rotating the right side of the cover slightly away from the printer to disengage the link. 7. Remove the access cover. Reinstallation note: If the access cover is being replaced, remove the logo plate and use it on the new cover. Extender cover removal (See "Frame" on page 7-6.) 1. Locate the latches on the left and right sides of the extender cover. 2. Push the latches and pull the cover away from the rear of the printer. 4-2 Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
4-2
Service Manual
4505
Covers
Access cover removal
(See
“Covers” on page 7-2
.)
1.
Open the front access cover.
2.
Place thumbs on the inside of the respective hinge.
3.
Force the left hinge out of its socket and relax it above the
socket.
4.
Force the right hinge out of its socket and lift it above the socket.
CAUTION:
Do not pull the fuser link out of the printer any farther
than when the door is fully open. Otherwise, the link extension may
cause the cartridge coupler to become dislodged.
5.
Carefully lift the cover free from the printer frame.
6.
Use your left hand to hold the fuser link at the cover joint while
rotating the right side of the cover slightly away from the printer
to disengage the link.
7.
Remove the access cover.
Reinstallation note:
If the access cover is being replaced, remove
the logo plate and use it on the new cover.
Extender cover removal
(See
“Frame” on page 7-6
.)
1.
Locate the latches on the left and right sides of the extender
cover.
2.
Push the latches and pull the cover away from the rear of the
printer.