Lexmark E330 Service Manual - Page 133
LVPS / HVPS to controller card cable removal, Manual feed clutch assembly removal, Operator panel
View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
4505 LVPS / HVPS to controller card cable removal (See "Electronics" on page 7-4.) 1. Remove the LVPS/HVPS card. See "LVPS / HVPS card assembly removal" on page 4-10 for more information. 2. Remove the controller card cover. See "Controller card removal" on page 4-4 for more information. 3. Unplug the cable at J7 and extract the cable. Note: The card may not have to be completely removed to disconnect the cable. Manual feed clutch assembly removal (See "Frame" on page 7-6.) 1. Remove the left side cover. 2. Place the printer on its right side. Protect the cover from being marred. 3. Remove the four screws in the gear train metal cover. 4. Remove the clip from the shaft of the pick up clutch assembly. 5. Remove the screw and lever (pawl). 6. Remove the clutch assembly. If the pieces come apart, they can be easily reassembled if necessary. Operator panel removal (See "Electronics" on page 7-4.) 1. Open access door. 2. Open the right cover. 3. Remove the controller card cover. 4. Unplug the operator panel from the controller card at J16. 5. Remove two screws at the front top and bottom of the operator panel. 6. Remove the operator panel. Repair information 4-11