Lexmark E330 Service Manual - Page 79
Cover interlock switch service check
View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4505 Cover interlock switch service check Note: Make sure a print cartridge assembly is installed and the cover closes all the way, engaging the cover open switch lever. FRU Cover interlock switch Action Disconnect the cover interlock cable from the controller card at J13. Verify continuity between cable pin 1 and pin 2 with the door closed but not open. Verify continuity between cable pin 1 and pin 3 with the door open but not closed. • If either fail continuity, replace the cover interlock switch. • If both pass continuity, turn the printer on and verify +5 V dc on pin 2 at J6 on the controller card. • Verify pins 1 and 3 are ground. • If voltage or ground is not present, see "Controller card service check" on page 2-49 for more information. Verify discontinuity between pins 2 and 3 whether the door is open or closed. Replace the cover interlock switch if faulty. Diagnostic information 2-51