Lexmark E330 Service Manual - Page 136
Transport motor cable removal
View all Lexmark E330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
4505 Transport motor cable removal (See "Electronics" on page 7-4.) 1.Remove the right cover. See "Right side cover removal" on page 4-3 for more information. 2.Remove the controller card cover. See "Controller card removal" on page 4-4 for more information. 3.Unplug the transport motor cable (XPRT) at J9. 4.Remove the LVPS/HVPS card assembly. See "LVPS / HVPS card assembly removal" on page 4-10 for more information. 5.Extract the cable through the side frame leaving it free at the opening above the LVPS/HVPS. 6.Remove the fuser. See "Fuser removal" on page 4-8 for more information. 7.Extract the cable through the hole and from its retainers. 8.Unplug the cable at the motor and install the new cable. 4-14 Service Manual
4-14
Service Manual
4505
Transport motor cable removal
(See
“Electronics” on page 7-4
.)
1.Remove the right cover. See
“Right side cover
removal” on page 4-3
for more information.
2.Remove the controller card cover. See
“Controller card removal” on page 4-4
for more
information.
3.Unplug the transport motor cable (XPRT) at J9.
4.Remove the LVPS/HVPS card assembly. See
“LVPS / HVPS
card assembly removal” on page 4-10
for more information.
5.Extract the cable through the side frame leaving it free at the
opening above the LVPS/HVPS.
6.Remove the fuser. See
“Fuser removal” on page 4-8
for more
information.
7.Extract the cable through the hole and from its retainers.
8.Unplug the cable at the motor and install the new cable.