Lexmark MS711 User's Guide - Page 12

Learning about the printer 12 In a configuration with two or more optional finishers: • The staple finisher must always be on top. • The high‑capacity output expander must always be at the bottom. • The output expander is the only finisher that can be placed on top of the high‑capacity output expander. • The output expander and mailbox may be installed in any order. When using optional trays: • Always use a caster base when the printer is configured with a 2100‑sheet tray. • The 2100‑sheet tray must always be at the bottom of a configuration. • A maximum of four optional trays may be configured with the printer. • The optional 250‑ and 550‑sheet trays may be installed in any order. Using the printer control panel 1 2 34 5 6 10 9 87 Use the To 1 Display • View the printer status. • Set up and operate the printer. 2 Select button Submit changes made in the printer settings. 3 Arrow buttons Scroll up and down or left and right. 4 Keypad Enter numbers, letters, or symbols. 5 Sleep button Enable Sleep mode or Hibernate mode. Do the following to wake the printer from Sleep mode: • Press any hard button. • Pull out Tray 1 or load paper in the multipurpose feeder. • Open a door or cover. • Send a print job from the computer. • Perform a power‑on reset with the main power switch. • Attach a device to the USB port on the printer. 6 Stop or Cancel button Stop all printer activity. 7 Back button Return to the previous screen.