Lexmark MS711 User's Guide - Page 91
Bin Setup menu, Portrait Width, Notes, Portrait Height, Feed Direction, Output Bin
View all Lexmark MS711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Understanding printer menus Use Portrait Width 3-8.5 inches 76-216 mm Portrait Height 3-14.17 inches 76-360 mm Feed Direction Short Edge Long Edge Bin Setup menu Use Output Bin Standard Bin Bin [x] 91 To Set the portrait width. Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. You can increase the width in 0.01‑inch increments. • 216 mm is the international factory default setting. You can increase the width in 1‑mm increments. Set the portrait height. Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. You can increase the height in 0.01‑inch increments. • 356 mm is the international factory default setting. You can increase the height in 1‑mm increments. Specify the feed direction if the paper can be loaded in either direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray. To Specify the default bin. Notes: • If multiple bins are assigned the same name, then the name appears only once in the menu. • Standard Bin is the factory default setting.