Lexmark MS711 User's Guide - Page 98

Understanding printer menus 98 Use Enable IPv6 On Off Auto Configuration On Off View Hostname View Address View Router Address Enable DHCPv6 On Off To Enable IPv6 in the printer. Note: On is the factory default setting. Specify whether or not the wireless network adapter accepts the automatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting. Set the host name. Note: These settings can be changed only from the Embedded Web Server. Enable DHCPv6 in the printer. Note: On is the factory default setting. Wireless menu Note: This menu is available only in printers connected to a wireless network or printer models that have a wireless network adapter. To access the menu, navigate to: Network/Ports > Network [x] > Network [x] Setup > Wireless Use Wi‑Fi Protected Setup Start Push Button Method Start PIN Method Enable/Disable WPS Auto‑detection Enable Disable Network Mode BSS Type Infrastructure Ad hoc Compatibility 802.11b/g 802.11b/g/n To Establish a wireless network and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network when buttons on both the printer and the access point (wireless router) are pressed within a given period of time. • Start PIN Method connects the printer to a wireless network when a PIN on the printer is entered into the wireless settings of the access point. Automatically detect the connection method that an access point with WPS uses-Start Push Button Method or Start PIN Method. Note: Disable is the factory default setting. Specify the network mode. Notes: • Infrastructure is the factory default setting. This lets the printer access a network using an access point. • Ad hoc configures wireless connection directly between the printer and a computer. Specify the wireless standard for the wireless network. Note: 802.11b/g/n is the factory default setting.