Lexmark MS711 User's Guide - Page 182
Install bin [x], Insufficient memory for Flash Memory Defragment operation [37], Insufficient memory
View all Lexmark MS711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Troubleshooting 182 Install bin [x] Try one or more of the following: • Install the specified bin: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the specified bin. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. • Cancel the print job. • Reset active bin Install Tray [x] Try one or more of the following: • Install the specified tray: 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Install the specified tray. 4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on. • Cancel the print job. • Reset the active bin. Insufficient memory for Flash Memory Defragment operation [37] Try one or more of the following: • From the printer control panel, press to stop the defragmentation and continue printing. • Delete fonts, macros, and other data in the printer memory. From the printer control panel, navigate to: > Settings > > Settings > >Print Settings > > Utilities Menu > > Format Flash > > Yes > • Install additional printer memory. Insufficient memory, some Held Jobs were deleted [37] From the printer control panel, press to clear the message.