Lexmark MS711 User's Guide - Page 181
Incompatible output bin [x] [59], Incorrect paper size, open [paper source] [34]
View all Lexmark MS711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Troubleshooting 181 Incompatible output bin [x] [59] Do either of the following: • Remove the specified bin. • From the printer control panel, press bin. to clear the message and continue printing without using the specified Incompatible tray [x] [59] Do either of the following: • Remove the specified tray. • From the printer control panel, press tray. to clear the message and continue printing without using the specified Incorrect paper size, open [paper source] [34] Try one or more of the following: • Load the correct size of paper in the tray. • From the printer control panel, press to clear the message and print using a different tray. • Check the tray length and width guides and make sure the paper is loaded properly in the tray. • Make sure the correct paper size and type are specified in Print Properties or in the Print dialog. • Make sure the paper size and type settings are specified in the Paper menu on the printer control panel. • Make sure the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, then make sure the paper is large enough for the data being printed. • Cancel the print job. Insert hole punch box Insert the hole punch box into the finisher, and then press on the printer control panel to clear the message. Insert staple cartridge Do either of the following: • Insert a staple cartridge. For more information, see the instruction sheet that came with the supply. • From the printer control panel, press to clear the message and print without using the staple finisher. Insert Tray [x] Insert the indicated tray into the printer.