Lexmark MX810 Quick Reference - Page 11

d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks into place. 3 Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. One‑sided printing Two‑sided printing ABC A B C 4 Load the paper stack with the printable side facedown. Note: Make sure the paper is loaded properly. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not. Without an optional staple finisher With an optional staple finisher ABC ABC Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur. One‑sided printing ABC One‑sided printing ABC Two‑sided printing Two‑sided printing • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray. 11