Lexmark MX810 Quick Reference - Page 14

• Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface. 5 Load the paper or specialty media. Note: Slide the stack gently into the multipurpose feeder until it comes to a stop. • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat and is not bent or wrinkled. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not. Without an optional staple finisher With an optional staple finisher Without an optional staple finisher With an optional staple finisher ABC Two‑sided printing Two‑sided printing • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the paper are on the right side of the tray. One‑sided printing Two‑sided printing ABC ABC • Load envelopes with the flap side down and on the left of the multipurpose feeder. Warning-Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. EXEC B5 A4 A5 LTR One‑sided printing One‑sided printing Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur. 14