Lexmark T642 User's Guide - Page 32
Installing or removing a flash memory or firmware card, Installation
UPC - 734646722001
View all Lexmark T642 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing and removing options Installing or removing a flash memory or firmware card Installation Note: Flash memory or firmware cards designed for other Lexmark printers may not work with the printer. 1 Remove the system board access cover. (See Accessing the printer system board.) Note: If an option card has been installed, you may need to remove the option card before installing the flash memory or firmware card. 2 Unpack the flash memory or firmware card. 3 Holding the flash memory or firmware card by the locking clips, align the plastic pins on the card with the holes on the system board. 4 Push the flash memory or firmware card firmly into place, and release the locking clips. The entire length of the connector on the flash memory or firmware card must touch the system board and be locked into the connector. Be careful not to damage the connectors. Connector Flash memory or firmware card Installing or removing a flash memory or firmware card 32