Lexmark T642 User's Guide - Page 33
Removal, Avoid touching the metal pins on the bottom of the card.
UPC - 734646722001
View all Lexmark T642 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installing and removing options Removal 1 Remove the system board access cover. (See Accessing the printer system board.) Note: If an option card has been installed, you may need to remove the option card before removing the flash memory or firmware card. 2 Squeeze the flash memory or firmware card locking clips. 3 Pull the card out. Avoid touching the metal pins on the bottom of the card. 4 Place the flash memory or firmware card in its original packaging. If you do not have the original packaging, wrap the flash memory or firmware card in paper, and store it in a box. 5 If you removed an option card to access the flash memory or firmware card, reinstall the option card. Installing or removing a flash memory or firmware card 33
Installing or removing a flash memory or firmware card
33
Installing and removing options
Removal
1
Remove the system board access cover. (See
Accessing the printer system board
.)
Note:
If an option card has been installed, you may need to remove the option card before removing the
flash memory or firmware card.
2
Squeeze the flash memory or firmware card locking clips.
3
Pull the card out.
Avoid touching the metal pins on the bottom of the card.
4
Place the flash memory or firmware card in its original packaging.
If you do not have the original packaging, wrap the flash memory or firmware card in paper, and store it in a box.
5
If you removed an option card to access the flash memory or firmware card, reinstall the option card.