Lexmark X543 User's Guide - Page 100
Setting the outgoing fax name and number, Setting the date and time
View all Lexmark X543 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Setting the outgoing fax name and number To have the designated fax name and fax number printed on outgoing faxes: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Fax Settings. 4 Click Analog Fax Setup. 5 Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes. 6 Click inside the Station Number box, and then enter the printer fax number. 7 Click Submit. Setting the date and time You can set the date and time so that they are printed on every fax you send. If there is a power failure, you may have to reset the date and time. To set the date and time: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Set Date and Time. 4 Click inside the Set Date & Time box, and then enter the current date and time. 5 Click Submit. Turning daylight saving time on or off The printer can be set to automatically adjust for daylight saving time: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Set Date and Time. 4 In the Daylight Savings box, click on one of the following: Yes turns daylight saving on. No turns daylight saving off. 5 Click Submit. Faxing 100