Lexmark X543 User's Guide - Page 23
Additional printer setup, Installing internal options, Available options, Installing a memory card
View all Lexmark X543 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Additional printer setup Installing internal options CAUTION-SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this section explain how to install the available cards; you can also use them to locate a card for removal. Available options Note: Certain options are not available on selected printer models. Memory cards • Printer memory • Flash memory • Font cards Installing a memory card CAUTION-SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Note: This task requires a #2 Phillips screwdriver. 1 Access the system board on the back of the printer. a Turn the screws on the cover counterclockwise, and then remove them. b Gently pull the cover away from the printer, and then remove it. Additional printer setup 23