Lexmark X543 User's Guide - Page 72
Printing information s, Printing a font sample list, Printing a directory list
View all Lexmark X543 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Printing information pages For more information on printing these pages, see "Printing menu settings pages" on page 34 and "Printing a network setup page" on page 34. Printing a font sample list To print samples of the fonts currently available for your printer: 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the arrow buttons until Reports appears, and then press . 4 Press the arrow buttons until Print Fonts appears, and then press . 5 Press the arrow buttons until PCL Fonts, PostScript Fonts, or PPDS Fonts appears, and then press . After the font sample list prints, Ready appears. Printing a directory list A directory list shows the resources stored in flash memory or on the hard disk. 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the arrow buttons until Reports appears, and then press . 4 Press the arrow buttons until Print Directory appears, and then press . After the directory list prints, Ready appears. Printing the print quality test pages Print the print quality test pages to isolate print quality problems. 1 Turn the printer off. 2 Hold down and the right arrow button while turning the printer on. 3 Release the buttons when the dots appear, and wait for CONFIG MENU to appear. 4 Press the arrow buttons until PRINT_QUAL_TXT appears, and then press . The print quality test pages print. 5 Press the arrow buttons until Exit Config Menu appears, and then press . Resetting the Printer appears briefly, and then Ready appears. Printing 72