Olympus SP-610UZ SP-610UZ Instruction Manual (English) - Page 48

Menus for Other Camera Settings, Using an Eye-Fi card commercially, available [Eye-Fi]

Page 48 highlights

For information on using the menus, see "Setup menu" (p. 6). Menus for Other Camera Settings The default settings of the function are highlighted in . Erasing data completely [Memory Format]/[Format] r (Settings 1) X Memory Format/Format Before formatting, check that no important data is left in the internal memory or card. Cards must be formatted with this camera before first use or after being used with other cameras or computers. Submenu 2 Yes No Application Completely erases the image data in the internal memory*1 or card (including protected images). Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images in the internal memory to the card [Backup] r (Settings 1) X Backup Submenu 2 Yes No Application Backs up image data in the internal memory to the card. Cancels the backup. It takes some time to back up data. Check that the battery has sufficient power before starting the backup. 48 EN Using an Eye-Fi card (commercially available) [Eye-Fi] r (Settings 1) X Eye-Fi Submenu 2 Off On Application Disable Eye-Fi communication. Enable Eye-Fi communication. When using an Eye-Fi card, read the Eye-Fi card instruction manual carefully, and comply with the instructions. Use the Eye-Fi card in compliance with the laws and regulations of the country where the camera is used. In locations such as on an airplane, where the Eye-Fi communication is prohibited, remove the Eye-Fi card from the camera, or set [Eye-Fi] to [Off]. This camera does not support the Eye-Fi card's Endless mode.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

48
EN
For information on using the menus, see “Setup menu” (p. 6).
Menus for Other Camera Settings
Menus for Other Camera Settings
The default settings of the function are highlighted in
.
Using an Eye-Fi card (commercially
Using an Eye-Fi card (commercially
available) [Eye-Fi]
available) [Eye-Fi]
r
(Settings 1)
Eye-Fi
Submenu 2
Application
Off
Disable Eye-Fi communication.
On
Enable Eye-Fi communication.
When using an Eye-Fi card, read the Eye-Fi card
instruction manual carefully, and comply with the
instructions.
Use the Eye-Fi card in compliance with the laws and
regulations of the country where the camera is used.
In locations such as on an airplane, where the Eye-Fi
communication is prohibited, remove the Eye-Fi card
from the camera, or set [Eye-Fi] to [Off].
This camera does not support the Eye-Fi card’s
Endless mode.
Erasing data completely
Erasing data completely
[Memory Format]/[Format]
[Memory Format]/[Format]
r
(Settings 1)
Memory Format/Format
Before formatting, check that no important data is left
in the internal memory or card.
Cards must be formatted with this camera before
rst use or after being used with other cameras or
computers.
Submenu 2
Application
Yes
Completely erases the image data
in the internal memory
*1
or card
(including protected images).
No
Cancels formatting.
*1
Be sure to remove the card before formatting the
internal memory.
Copying images in the internal memory
Copying images in the internal memory
to the card [Backup]
to the card [Backup]
r
(Settings 1)
Backup
Submenu 2
Application
Yes
Backs up image data in the internal
memory to the card.
No
Cancels the backup.
It takes some time to back up data. Check that
the battery has suf
cient power before starting the
backup.