Olympus SP-610UZ SP-610UZ Instruction Manual (English) - Page 53
Saving battery power between shots, Power Save], Changing the display language
View all Olympus SP-610UZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
For information on using the menus, see "Setup menu" (p. 6). Type C Type D (CB-HD1) 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)." For details on changing the input source of the TV, refer to the TV's instruction manual. 4 Turn on the camera, and use HI to select the image for playback. Depending on the TV's settings, the displayed images and information may become cropped. To operate images with the TV remote control 1 Set [HDMI Control] to [On], and turn off the camera. 2 Connect the camera and TV with an HDMI cable. "Connection via HDMI cable" (p. 52) 3 First turn on the TV, and then turn on the camera. ● Operate by following the operation guide that is displayed on the TV. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the camera. Saving battery power between shots [Power Save] s (Settings 2) X Power Save Submenu 2 Off On Application Cancels [Power Save]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. Changing the display language [l] s (Settings 2) X l Submenu 2 Languages Application The language for the menus and error messages displayed on the monitor is selected. To resume standby mode Press any button. EN 53