Onkyo TX-NR709 Owner Manual - Page 43

Advanced Operations Advanced Setup The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. This section describes the procedure for using the remote controller unless otherwise specified. On-screen Setup Menus MENU B 1. Input/Output Assign C 2. Speaker Setup D 3. Audio Adjust E 4. Source Setup F 5. Listening Mode Preset G 6. Miscellaneous H 7. Hardware Setup I 8. Remote Controller Setup J 9. Lock Setup B Input/Output Assign G Miscellaneous (➔ page 44) (➔ page 57) 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 5. Analog Audio Input C Speaker Setup (➔ page 46) 6. Miscellaneous 1. Volume Setup 2. OSD Setup H Hardware Setup (➔ page 57) 2. Speaker Setup 1. Speaker Settings 2. Speaker Configuration 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings 6. THX Audio Setup D Audio Adjust (➔ page 50) 7. Hardware Setup 1. Remote ID 2. Tuner 3. HDMI 4. Auto Standby 5. Network 6. Firmware Update I Remote Controller Setup (➔ page 69) 3. Audio Adjust 1. Multiplex/Mono 2. Dolby 3. DTS 4. Audyssey DSX 5. Theater-Dimensional 6. LFE Level E Source Setup (➔ page 52) 8. Remote Controller Setup 1. Remote Mode Setup J Lock Setup (➔ page 61) 4. Source Setup 1. Audyssey 2. IntelliVolume 3. A/V Sync 4. Name Edit 5. Picture Adjust 6. Audio Selector F Listening Mode Preset (➔ page 56) 9. Lock Setup Setup 5. Listening Mode Preset 1. BD/DVD 2. VCR/DVR 3. CBL/SAT 4. GAME 5. PC 6. AUX Common Procedures in Setup Menu RECEIVER ENTER R/X/F/S SETUP RETURN The on-screen setup menus appear on the connected TV and provide a convenient way to change the AV receiver's various settings. Settings are organized into 9 categories on the main menu. Carry out the settings by using the on-screen display. 1 Press RECEIVER followed by SETUP. Tip • If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use R/X to select a menu, and then press ENTER. 3 Use R/X to select a target, and then press ENTER. 4 Use R/X to select an option, and use F/S to change the setting. Press SETUP to close the menu. Press RETURN to return to the previous menu. Note • This procedure can also be performed on the AV receiver by using SETUP, the arrow buttons, and ENTER. • During Audyssey MultEQ® XT Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear in the Display. Explanatory Notes B Main Menu Speaker Configuration C ■ Subwoofer D ` Yes ` No B Menu selection C Setting target D Setting options (default setting underlined) En 43