Panasonic 55 Professional Display for Entry-Level Digital Signage Operating In - Page 54
Network settings, SERIAL IN], DIGITAL LINK], DHCP], [IP address], [Subnet mask], [Gateway], Press
View all Panasonic 55 Professional Display for Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Network settings Set when networking with a computer. [Network settings] submenu will be displayed. LF8 Network settings Network control Display name LAN setup Network status AMX D.D. Crestron Connected™ Off LF8-00 Off Off Reset LF80 Network settings Serial control Network control Display name LAN setup Network status DIGITAL LINK mode DIGITAL LINK status DIGITAL LINK menu AMX D.D. Crestron Connected™ Extron XTP Reset SERIAL IN Off LF80-00 Auto Off Off Off ■■[Serial control] (LF80 series only) Selects the RS232-C control terminal. [SERIAL IN]: Controls using the SERIAL IN terminal of the display. [DIGITAL LINK]: Controls via the optional device that supports DIGITAL LINK output (ET-YFB100G, ETYFB200G) and the DIGITAL LINK / LAN terminal. ■■[Network control] Set when controlling with the unit's LAN terminal. [On]: Controls via LAN using the LAN terminal of the Display. The power indicator lights orange when the power is turned off with the remote control (standby). [Off]: Invalidates control with LAN terminal. (In this case, the power consumption of Standby condition (when the power is turned off with the remote control) will be slightly reduced.) Note ● When using the LAN control function for "Using Network Function" (page 71 - 78), set this function to [On]. Even if [Off] is selected, the HDMI communication via a twisted pair cable transmitter is possible while the power is on. ■■[Display name] The name of the Display that is shown on the network can be changed. ■■[LAN setup] Detailed network settings for the LAN established via the LAN terminal of the Display or twisted pair cable transmitter can be configured. Select [LAN setup] with and press . LAN setup Save DHCP IP address Subnet mask Gateway Off 192.168. 0. 8 255.255.255. 0 192.168. 0. 1 Port 1024 MAC address [DHCP], [IP address], [Subnet mask], [Gateway] Press to set [On] / [Off] of [DHCP] and press . When [Off] is selected, IP address and other settings can be set manually. [DHCP]: (DHCP client function) [On]: Obtains an IP address automatically when a DHCP server exists in the network the Display is going to be connected. [Off]: When a DHCP server does not exist in the network the Display is going to be connected, set [IP address], [Subnet mask] and [Gateway] manually. 54 English