Panasonic 55 Professional Display for Entry-Level Digital Signage Operating In - Page 66
Onscreen display, Initial input, Initial VOL level, Maximum VOL level, Input lock, Button lock
View all Panasonic 55 Professional Display for Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Onscreen display Set to display / hide the following Onscreen display. ● Power on display ● Input signal switch display ● No signal display ● MUTE display after displaying the menu screen ● MUTE and off timer remaining time display after is pressed ● Off timer remaining time display when 3 minutes remaining [On]: Displays the Onscreen display. [Off]: Hides the Onscreen display. Initial input Adjusts the input signal when the unit is turned on. [Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK]*1 / [DVI-D] / [PC] / [COMPONENT]*2 / [VIDEO] / [USB] *1: [DIGITAL LINK] is for LF80 series only. *2: [COMPONENT] may be displayed as [RGB] depending on the settings of [Component/RGB-in select]. (see page 46) Note ● This menu is available only when [Input lock] is [Off]. (see page 66) Initial VOL level Adjusts the sound volume level when the unit is turned on. [Off]: It will be the sound volume level which had been set before the power of the unit was turned off. [On]: Sets your preferred volume. ● You can hear the changed volume regardless of your volume setting before opening the [Options] menu if you adjust the volume when [Initial VOL level] is [On] and cursor is on the menu. ■■To adjust sound volume level Press . Note ● When [Maximum VOL level] is [On], the volume can only be adjusted between 0 and your maximum range. Maximum VOL level Adjusts the maximum volume. [Off]: The sound volume level can be set up to 100 (maximum). [On]: The sound volume level will not exceed the set point. ● You can hear the changed volume regardless of your volume setting before opening the [Options] menu if you adjust the volume when [Maximum VOL level] is [On] and cursor is on the menu. ■■To adjust sound volume level Press . Note ● When the [Maximum VOL level] is switched from [Off] to [On], if the [Maximum VOL level] is set lower than the [Initial VOL level], the [Initial VOL level] automatically becomes the same as the [Maximum VOL level]. Input lock Locks the input switch operation. [Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK]*1 / [DVI-D] / [PC] / [COMPONENT]*2 / [VIDEO] / [USB] *1: [DIGITAL LINK] is for LF80 series only. *2: [COMPONENT] may be displayed as [RGB] depending on the settings of [Component/RGB-in select]. (see page 46) Note ● Input switch can be used when this is set to [Off]. Button lock Limits operation of the buttons on the unit. [Off]: All the buttons on main unit can be used. [On]: All button operations except for the are disabled. [MENU&ENTER]: Locks and buttons. 66 English