Panasonic 55 Professional Display for Entry-Level Digital Signage Operating In - Page 75
When [LAN control protocol] is set, to [Protocol 2]., When the WEB control administrator
View all Panasonic 55 Professional Display for Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
2. When [LAN control protocol] is set to [Protocol 2]. Communicates with the same protocol as that of a Panasonic projector ■■When the WEB control administrator privileges password has been set (Protect mode) Connection method 1 Obtain the display's IP address and the port number (Default is 1024), and request connection to the display. The IP address and the port number can be obtained from the following menus. •• IP address: [Setup] → [Network settings] → [LAN setup] or [Network status] •• Port number: [Setup] → [Network settings] → [LAN setup] For more detail of the settings, see page 54 - 55. 2 The display responds. Response data Random Last Data part Space Mode Space number terminal part symbol [NTCONTROL] (ASCII character string) [ ] 0x20 [1] 0x31 [ ] 0x20 [zzzzzzzz] (ASCII code hex number) (CR) 0x0d 9 bytes 1 byte 1 byte 1 byte 8 bytes 1 byte Mode: 1 = Protect mode 3 Hash the following data with the MD5 algorithm, and generate a 32-byte hash value. [xxxxxx:yyyyy:zzzzzzzz] xxxxxx : WEB control administrator privileges user name yyyyy : Above administrator privileges user password ● Default user name and password are as follows: User name: admin1 Password: panasonic zzzzzzzz : 8-byte random number obtained in step 2 Command transmission method Transmit in the following command format Transmitted data Header Hash value (see "Connection method") '0' 0x30 '0' 0x30 Last Data part terminal symbol Control command (ASCII character string) (CR) 0x0d 32 bytes 1 byte 1 byte Undefined 1 byte Received data Header '0' 0x30 1 byte '0' 0x30 1 byte Data part Control command (ASCII character string) Undefined Last terminal symbol (CR) 0x0d 1 byte Error response Error message "ERR1" "ERR2" "ERR3" "ERR4" "ERR5" "ERRA" 4 bytes Last terminal symbol : Undefined control command : O ut of parameter range : B usy status or reception invalid period : T imeout or reception invalid period (CR) 0x0d : W rong data length : Mismatching of password 1 byte English 75