Panasonic 55 Professional Display for Entry-Level Digital Signage Operating In - Page 83
Adjust clock Ping test Command port set up
View all Panasonic 55 Professional Display for Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Adjust clock page Click [Detailed set up], then [Adjust clock] to display the Adjust clock page. Command port set up page Set the port number to be used with command control. Click [Detailed set up], then [Command port set up] to display the Command port set up page. New date field New time field Button to update time and date settings Note ● Date and time is displayed as [- -] when they are not set. ● When [Network control] is set to [On] and it is in standby mode, date and time display will be blank and they cannot be set. ● If the time becomes incorrect immediately after setting the correct time, contact the dealer where you bought the Display. Ping test page This page makes it possible to check whether the network is connected to the DNS server, etc. Click [Detailed set up], then [Ping test] to display the Ping test page. Input the port number to be used with command control. Setting update button. Enter the IP address of the server to be tested. Button for conducting the test Display which appears when the connection was successful. Display which appears when the connection failed. English 83