Panasonic BT-4LH310 Parts List - Page 39

8．Specification of pixel defect 8-1. Inspection Method ■ Ambient conditions ・Temperature ：25±5℃ ・Illumination ：300～700 lux ・Humidity ：65±10％ RH ■ Setting values of picture adjusting Menu ・PEAKING = 100 ・CONTRAST = 100 ・CHROMA = 100 ・F-IN-R = 15 ・PHASE = 100 ・BACKLIGHT = 100 ・BRIGHT = 100 ■ Viewing distance (Between the LCD Monitor and the inspector's eyes) ・Approx. 50cm （ Looking at the front） ■ Input signal ・SDI In ：2048 X 1080 / 24P or 23P 300～700 lux 50cm 8-2. Dot Defect 8-2-1. Bright Dot ＜Definition＞ A bright dot is the dot defect which is seen when the 40% white signal is input. (Not counting size: less than half of 1 single dot) ＜Specification＞ ・Bright dot (1 single dot) ：16 dots or less Bright dot Dust Bright dot ・Bright dot (2 adjacent dots) ： 0 set ・Bright dot (3 adjacent dots) ： 0 set ・Density（in a circle with 10mm diameter.） ： 3 dots or less ・Total amount of bright dots ：16 dots or less ・Diameter of Dust Bright dot ≦ 0.25mm ：10 pcs 1 single dot not counting ・Diameter of Dust Bright dot > 0.25mm ： 0 pc Dark dot 8-2-2. Dark Dot ＜Definition＞ A dark dot is the dot defect which is seen when the 100% white signal is input. ＜Specification＞ ・Dark dot (1 single dot) ：20 dots or less ・Dark dot (2 adjacent dots) ： 2 sets ・Dark dot (3 adjacent dots) ： 0 set ・Density（in a circle with 10mm diameter.） ： 3 dots or less 1 single dot 2 adjacent dots ・Total amount of dark dots ：20 dots or less Dark dot (Density） 8-2-3. Total amount of Dot Defect (Bright dot and Dark dot) ＜Specification＞ Total amount of dot Defect (Bright dot and Dark dot) ・Total amount of bright and dark dot ：30 dots or less ・Density（in a circle with 10mm diameter.） ： 3 dots or less 8-2-4. Dust inclusion ＜Specification＞ ・Diameter of Dust ≦ 0.25mm ・Diameter of Dust ≦ 0.4mm ・Diameter of Dust > 0.4mm ： not counting ： 8 pcs or less ： 0 pc 10mm Density: 3 dots Nonuniformity (Image） 8-3. Nonuniformity ＜Specification＞ ・Nonuniformity is not seen when the 10% white signal is input. INF - 22