Panasonic BT-4LH310 Parts List - Page 54
Procedure of writing LCD Panel data, Gamma Corrector_BT4LH310.EXE
View all Panasonic BT-4LH310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
1-2. Procedure of writing LCD Panel data Please write LCD Panel data as follows. 1. Boot up the unit in the service mode (While simultaneously pressing the"SDI","HDMI-DUAL", "HDMI-SINGLE" button, turn ON the power.). 2. Press the MENU button to open the service menu and confirm that the item "REMOTE TYPE" set to "ACK/CS OFF". 3. Turn the power off and then on again. (Boot up the unit in the normal mode). 4. Double-click the file "GammaCorrector_BT-4LH310.exe" to boot up the gamma adjustment software. Gamma Corrector_BT4LH310.EXE NOTE: When the ERROR message appears, take the following procedures. 1. Click the "OK" button in the ERROR message so that the Gamma Corrector screen appears. 2. Click the "File" → "Property(P)" button so that the Property screen appears. 3. Set the Analyzer MODEL to "No Connect" and click the "OK" button. 4. Restart the Gamma corrector application. 5. BT-4LH310 Gamma Corrector screen appears as follows. ADJ - 3