Panasonic HDC-SX5 Hd Video Camera - Multi Language - Page 140
Troubleshooting, Unit operations
UPC - 037988255771
View all Panasonic HDC-SX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Others Troubleshooting ª Unit operations Problem This unit cannot be turned on. This unit is turned off automatically. This unit does not stay on long enough. Battery runs down quickly. The minute display of the remaining battery power indication is not displayed correctly. Check points ≥ Is the battery fully charged? # Charge the battery using the AC adaptor. (l 31) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Make sure the LCD monitor is opened or the viewfinder extended. ≥ If you do not use the unit for approximately 5 minutes, the power is automatically turned off to conserve battery life. To resume recording, turn the power back on. The power will not turn off automatically when the power save function is set to [OFF]. (l 131) ≥ Are you connecting to a TV compatible with EZ Sync with a HDMI cable? # If you connect to a TV compatible with EZ Sync with a HDMI cable and turn off the power on the TV with the remote control for the TV, the power on this unit also turns off. If you are not using EZ Sync, set [EZ Sync] to [OFF]. (l 103) ≥ Is the battery low? # If the remaining battery power indication is flashing or the message "CHANGE THE BATTERY." is displayed, the battery has run down. Charge the battery. (l 31) ≥ Is the battery fully charged? # Charge it with the AC adaptor. (l 31) ≥ Are you using the battery in an extremely cold place? # The battery is affected by ambient temperature. In cold places, battery life becomes shorter. ≥ Has the battery worn out? # The battery has a limited life. If the operating time is still too short even after the battery is fully charged, the battery has worn out and needs to be replaced. ≥ The remaining battery capacity indication is an approximation. If you think the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again. (Even if this operation is performed, it may not be possible to display the remaining battery capacity correctly if the battery was used for a long period of time where the temperature was low or high or if the battery was repeatedly charged.) 140 VQT1J42