Panasonic HDC-SX5 Hd Video Camera - Multi Language - Page 75

Recording Manual focus adjustment ̝̙ ̝̙ ̝̙ ̝̙ VIDEO PHOTO If auto focusing is difficult due to the conditions, then use manual focus. ¬ Rotate the mode dial to select or . 1 (When MF assist function is used) (HD mode only) Press the MENU button, then select [ADVANCED] # [MF ASSIST] # [ON] and press the cursor button. 2 Set the AUTO/MANUAL/FOCUS switch to MANUAL. 3 Move the switch down and set it to FOCUS position. The manual focus indication [MF] and the icon shown in the illustration appear. 4 Move the cursor button left or right to bring the subject into focus. To restore to the automatic adjustment Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position. ≥ You can also restore the auto focusing by setting the AUTO/MANUAL/FOCUS switch to AUTO. ≥ The subject may not be in focus when zoomed in if focusing with a wide angle. First, zoom in on the subject, and then focus on it. About the MF assist function (HD mode only) The center of the screen is enlarged during manual focus adjustment. This allows you to focus on the subject more easily. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. ≥ The center of the screen is not enlarged if [MF ASSIST] is set to [OFF]. ≥ MF assist does not work if the zoom magnification is more than 10k. ≥ The part of the screen that is enlarged is not enlarged on the image actually recorded. ≥ The zebra pattern does not appear on the part of the screen that is enlarged when [ZEBRA] is [ON]. 75 VQT1J42