Panasonic HDC-SX5 Hd Video Camera - Multi Language - Page 95
select [DISC SETUP], cursor button.
UPC - 037988255771
View all Panasonic HDC-SX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Disc and card management To allow the disc to be played back on other DVD players etc. (STD mode) DVD-RAM: ≥ It is not necessary to finalize DVD-RAM. DVD-RW (VR format): ≥ DVD-RW (VR format) after finalization can be recorded and edited in the same way as DVD-RW (VR format) before finalization. ≥ After finalizing a DVD-RW (VR format) once, you cannot finalize it again. (Even if you record on or edit a DVD-RW (VR format) after finalizing, it is not necessary to finalize it again.) DVD-RW (Video format), DVD-R and DVD-R DL: ≥ After finalizing, the disc becomes play-only and you can no longer record. ≥ When you un-finalize a DVD-RW (Video format), the disc can be used for recording again. (l 96) HD mode ¬ Rotate the mode dial to select and then select the [ ] tab. STD mode ¬ Rotate the mode dial to select . 1 Connect this unit to the AC adaptor. ≥ Finalization cannot be executed when using a battery. ≥ If the power supply stops while finalizing, the finalization will fail and the data may be damaged. 2 Press the MENU button, then select [DISC SETUP] # [FINALIZE] # [YES] and press the cursor button. MENU 3 When the confirmation message appears, select [YES], then press the cursor button. ≥ When finalizing is complete, press the MENU button to exit the message screen. HD mode ≥ When finalizing a DVD-RW, DVD-R or DVD-R DL a top menu containing thumbnails is created. STD mode ≥ When finalizing a DVD-RW (Video format) or DVD-R, a top menu containing thumbnails is created. ≥ Do not finalize a disc recorded on this unit using any other device. ≥ When using a double sided disc, finalize each side. ≥ The top menu created when finalizing does not appear on this unit. It appears when the disc is played back on other devices. ≥ Depending on the condition of the disc, the time it takes for finalizing will differ. It may take up to 22 minutes. ≥ Do not allow the unit to be heavily vibrated or shaken while finalizing a disc. Doing so may prevent the disc from being finalized resulting in an unplayable disc. ≥ If the power supply stops while finalizing, the finalization will fail and the disc may become unplayable on other devices even if disc repair is carried out. 95 VQT1J42