Panasonic HDC-SX5 Hd Video Camera - Multi Language - Page 145
When connected to another device, Others, PUSH THE RESET, SWITCH. or CHECK, THE DISC AFTER
UPC - 037988255771
View all Panasonic HDC-SX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Others Problem Check points ≥ Is the disc scratched or dirty? # After using the following method to restart the unit, eject the disc and clean it. (l 30) If there are scratches on the disc, use a new disc. ≥ The unit has automatically detected an error. Press the RESET button with the projecting part of the grip belt A. This will restart the unit. "PUSH THE RESET SWITCH." or "CHECK THE DISC AFTER PUSHING THE RESET SWITCH TO REPAIR THE DISC." is displayed. ≥ If you do not press the RESET button, the power to this unit is turned off automatically about 1 minute later. ≥ Even after you press the RESET button, the indication may still appear repeatedly. If so, this unit needs repair. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself. ª When connected to another device Problem EZ Sync does not work. Check points ≥ Are you connecting with the component cable or the AV cable? # Connect with a HDMI cable (optional). (l 103) ≥ Is the [EZ Sync] setting appropriate? # Press the MENU button, then select [SETUP] > [EZ Sync] > [ON] with the cursor button. ≥ Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input. (For details on how to switch input, please read the operating instructions for the TV.) ≥ Check the EZ Sync setting on the connected device. ≥ Turn the power to the unit off and then back on again. ≥ Set [EZ Sync] to [Off] on the TV and then turn it back to [On]. (Refer to the operating instructions of the TV for details.) ≥ Are you using pictures recorded in STD mode? # Use pictures recorded in HD mode. 145 VQT1J42