Panasonic KXTG9381 Cordless Answ System - Multi Language - Page 10

Getting started Connecting the telephone line cord Refer to one of the following methods depending on your situation: - To connect to a 2-line telephone jack: page 10 - To connect to 2 single-line telephone jacks: page 10 - If you use the unit as a single-line telephone only: page 10 Connect the telephone line cord until it clicks into the base unit and telephone line jack. To connect to a 2-line telephone jack "Click" "GREEN" plug 4-wire cord To 2-line telephone jack (RJ14C) To connect to 2 single-line telephone jacks "Click" "Transparent" plug "GREEN" plug 2-wire cord 4-wire cord To single-line telephone jacks (RJ11C) Line 1 Line 2 If you use the unit as a single-line telephone only Be sure to connect the telephone line cord to LINE 1/2. Change the line selection mode from "Auto" to "Line1" (page 17). "Click" "Transparent" plug 2-wire cord To single-line telephone jack (RJ11C) Note: L "Check tel line 2" is displayed on the unit. To erase it, see page 52. 10 For assistance, please visit http://www.panasonic.com/help