Panasonic PT52LCX66 Service Manual - Page 22
Led Indications For Error Conditions - resets itself
View all Panasonic PT52LCX66 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
PT-52LCX66 / PT-56LCX66 / PT-61LCX66 / PT-52LCX16 / PT-56LCX16 LED INDICATIONS FOR ERROR CONDITIONS Each LED indication facilitates finding the cause of an error. When an error is detected, the Lamp goes off and the LEDs on the front flash. LAMP LED TEMP LED POWER LED Error No. Error Information POWER LED TEMP LED flashes orange flashes red (Note 4) (Note 1, 2) (Note 3) LAMP LED flashes red SOS LAMP OFF RESET 1) SOS2 (Over voltage/current) 1 - - H10SOS2 Power ON/OFF 2) Fan 1, Fan 2 or Fan 3 stops 2 - - H20FANST AC ON/OFF 3) Abnormal voltage (DT+5V line) 3 - - H30DT9V Power ON/OFF 4) IC5001 (GC4Pro) communication error 5 - - H50GC4PR AC ON/OFF 5) Temperature Sensor shorted or open (Thermistor 2 P.C.B.) - 6) Abnormal temperature (Thermistor 2 P.C.B.) - 7) Clogged Air Filter - 2 - - Power 3 - - ON/OFF 6 - - Clean Air Filter 8) Abnormal Lamp - - 1 - 9) Iris Mechanism hardware error - 10) Iris calibration error - - 2 - - - 3 Power - - ON/OFF 11) Lamp Cover open 7 - - (H70LAMCV) 12) Abnormal voltage (+17V, +9V, +5V line) for LCD Drive P.C.B. 8 - - (H80LCDDV) Note: 1. The detected SOS Error 1) 2) 3) 4) 11) 12) data will be stored in the EEPROM. 2. SOS (Error) information is displayed in Service Mode (4/4). 3. LAMP OFF: The LED will flash immediately after the Lamp goes off. 4. In case of Error 9) or 10), the unit will not shut off and Dynamic Iris setting in Adv. adjust of Picture Menu will be changed to "OFF" automatically. When the unit is turned off and turned back on, Dynamic Iris "OFF" setting remains. Lamp LED will not flash as long as Dynamic Iris setting in Adv. adjust of Picture Menu is set to "ON" manually. 22