Panasonic SDRS150 SDRS150 User Guide - Page 106
OTHERS, ABOUT CONDENSATION, Causes of condensation, What to do with the lens is, fogged up.
UPC - 037988254460
View all Panasonic SDRS150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Troubleshooting (continued) Problem Check points The warning/alarm indication [°] appears when this unit is operated in the WEB camera mode. ≥ Did you press the record button or any other button? > You cannot record onto the card in the WEB camera mode. ≥ Have you installed the Web camera driver? > Install the driver, then check the connections. The [ PictBridge ] indication flashes when this unit is connected to a PC. ≥ The unit is connected to a Windows XP PC in still picture playback mode. > Connect with a printer supporting PictBridge. The [ WEB ] indication ≥ The unit is connected to the printer in motion picture appears when the unit is recording mode or still picture recording mode. connected to the printer. > Change the mode to still picture playback mode. Others About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room. ≥ When this unit is moved from an air-conditioned car to outside. ≥ When a cold room has been warmed up quickly. ≥ When cool wind from an air conditioner is directly blown onto this unit. ≥ After summer afternoon showers of rain. ≥ When this unit is in a very humid place where the air is thick with steam. (e.g. a heated swimming pool) When this unit is taken to a location with a significant temperature difference such as from a cold place to a hot place. If, for example, you have used this unit for recording on a ski slope and are taking it into a heated room, place the unit inside a plastic bag, remove as much of the air from inside the bag as possible, then seal the bag. Leave the unit for about an hour in the room so the temperature of the unit is close to the ambient temperature of the room, then use it. What to do with the lens is fogged up. Remove the battery or disconnect the AC adaptor and leave the unit for about 1 hour. When the unit becomes close to the ambient temperature, the fog disappears naturally. 106 VQT0X39