Panasonic SDRS150 SDRS150 User Guide - Page 59

SELF-TIMER RECORDING, To stop the timer midway through

Page 59 highlights

Self-timer recording This is for recording using the timer. You can record still pictures on an SD card using the timer. ¬ Rotate the mode dial to select . 1 Press the button in the center to display the icon shown in the figure. 2 3 1 Press the cursor button left to select the [Ø] self-timer icon. The [Ø10] icon flashes orange, then lights white. ≥ Each time the left cursor button is pressed, the indication changes by one setting in the following order: [Ø10]>[Ø2]>setting canceled. - Ø10: Starts recording after 10 seconds - Ø2: Starts recording after 2 seconds Press the record button. After the indication lamp and the [Ø10] or [Ø2] indication flash for the time which has been set, recording will start. After recording, the self-timer is canceled. 1 Indication lamp ≥ When the record button is pressed halfway and then all the way, the subject will be brought into focus when the record button was pressed halfway. ≥ When the record button is pressed all the way at once, the subject will be focused just before the recording. To stop the timer midway through Press the [MENU] button. (The self-timer setting is canceled.) ≥ If you turn off the power, the self-timer standby mode is canceled. ≥ Depending on the time taken to bring the subject into focus, the recording may take longer than set to start. ≥ Setting the self-timer to [Ø2] is a good way to prevent image shake when the record button is pressed while using a tripod etc. 59 VQT0X39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

59
VQT0X39
You can record still pictures on an SD card using the timer.
¬
Rotate the mode dial to select
.
1
Press the button in the center to
display the icon shown in the figure.
2
Press the cursor button left to select
the [
Ø
] self-timer icon.
The [
Ø
10
] icon flashes orange, then lights white.
Each time the left cursor button is pressed, the
indication changes by one setting in the
following order:
[
Ø
10
]
>
[
Ø
2
]
>
setting
canceled.
Ø
10
:
Starts recording after 10 seconds
Ø
2
:
Starts recording after 2 seconds
3
Press the record button.
After the indication lamp and the [
Ø
10
] or [
Ø
2
]
indication flash for the time which has been set,
recording will start. After recording, the self-timer
is canceled.
1
Indication lamp
When the record button is pressed halfway
and then all the way, the subject will be
brought into focus when the record button was
pressed halfway.
When the record button is pressed all the way
at once, the subject will be focused just before
the recording.
To stop the timer midway through
Press the [MENU] button. (The self-timer setting is canceled.)
Self-timer recording
This is for recording using the timer.
1
If you turn off the power, the self-timer
standby mode is canceled.
Depending on the time taken to bring the
subject into focus, the recording may take
longer than set to start.
Setting the self-timer to [
Ø
2
] is a good
way to prevent image shake when the
record button is pressed while using a
tripod etc.