Panasonic SDRS150 SDRS150 User Guide - Page 58
To adjust the brightness of the flash, Built-in flash continued
UPC - 037988254460
View all Panasonic SDRS150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Built-in flash (continued) To adjust the brightness of the flash ADVANCE FLASH RED EYE FLASH LEVEL O.I.S. REC LAMP SETUP ENTER 1/2 EXIT MENU Press the menu button, use the cursor button to select [ ADVANCE]> [ FLASH LEVEL], then set the desired brightness level. (P27) - [ßj]: If the brightness is too high ([ßj] or [ßAj] indication will appear.) - [ßd0]:In normal recording ([ß] or [ßA] indication will appear.) - [ßi]: If the brightness is insufficient ([ßi] or [ßAi] indication will appear.) ≥ Do not accidentally press or cover the flash with your fingers when holding the camera. ≥ Store the flash when it is not being used. ≥ The unit, even when its flash has been stored, automatically determines if the flash is necessary by detecting the ambient brightness. (If it determines that the flash is necessary, the [ß] indication flashes yellow.) ≥ When the [ß] ([ßi]/[ßj]) indication or the [ßA] ([ßAi]/[ßAj]) indication is displayed, the flash can be lit. If the indication is flashing or not displayed, the flash cannot be lit. ≥ The available range of the flash is approx. 1 m to 2 m (3.3 feet to 6.6 feet) in a dark place. Pictures will appear dark or reddish when they are recorded by using the flash at distances greater than 2 m (6.6 feet). ≥ When setting the flash to [ßA] and adjusting the shutter speed or iris/gain at the same time, the indication [ßA] etc. may disappear and the flash may not flash. ≥ Using the flash fixes the shutter speed of 1/750 or faster to 1/500. ≥ The picture may become out of focus in a dark place. If so, adjust the focus manually. (P48) ≥ The picture may appear dark if flash is lit in front of a white background. ≥ Keep the flash stored in locations where using a flash is prohibited. 58 VQT0X39