Panasonic SDRS150 SDRS150 User Guide - Page 70
PICTBRIDGE, Open the terminal cover, then firmly
UPC - 037988254460
View all Panasonic SDRS150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
DPOF setting (continued) ∫ What is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. ≥ The DPOF setting can be established for up to 999 scenes. ≥ DPOF setting made on another camera may not be recognized by this unit. Please perform the DPOF settings on this unit. ≥ You cannot add the recording date to pictures to be printed with the DPOF settings. ≥ If the write protection switch on an SD card is set to [LOCK], the DPOF setting cannot be set. (P16) PictBridge This is for printing pictures by directly connecting to the printer. To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) ¬ Connect this unit to the AC adaptor. ¬ Rotate the mode dial to select . 1 Open the terminal cover, then firmly plug one end of the USB cable 1 (supplied) into the unit's USB terminal and the other end into the terminal on the printer. Insert the plugs as far as they will go. 1 The images recorded on the SD card are displayed as thumbnails. PictBridge 1/24 SETUP ENTER ≥ When no SD card is inserted in this unit, the [ PictBridge ] indication does not appear. (You cannot print any pictures.) ≥ When this unit and the printer are not connected properly, the [ PictBridge ] indication keeps blinking. (It will blink for over approx. 1 minute.) Connect the cable or check the printer. ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) 70 VQT0X39